Table of Contents
Advertisement
Operation
Press the Q key (19) to turn
on the scale�
8
Once the scale has been
turned on, it will run an
automatic self-test� This is
concluded with the readout
0.0 g�
Weighing with One Decimal Place
Place an empty paint can on the load plate�
Press the U key (Zero/tare) (3)�
The display shows »0.0 g«� Pour the first component
of your formula into the can and read off the weight when
the stability symbol (in this example) »g« is displayed�
Add the other components up to the desired weight
(formula)�
Remove the filled paint can from the load plate�
Never use a hammer to close a paint can while is it still on
the load plate, as this will damage the weighing system�
If a different value is
displayed: Tare the scale
using the U key (Zero/
tare) (3)�
Advertisement
Table of Contents
