Operation; Switching The Device On And Off; Leveling The Device; Motorized Feet - Sartorius Cubis MCE Operating Instructions Manual

Operation

58 Operating Instructions Cubis
8 Operation
8.1

Switching the Device On and Off

The device only delivers accurate values if it has reached the necessary
operating temperature. The warm-up time after switching the device on
must therefore be complied with.
Procedure
Connect the device to the power supply.
t
If the device does not switch on automatically after it is connected to the
t
power supply: Press the on key on the electronics module.
To allow the device to reach the necessary operating temperature to
t
accurately determine the weight: Comply with the warm-up time of
2 hours after switching the device on.
If this relates to a conformity-assessed device: The weight value is
y
marked as invalid during the warm-up period.
NOTICE Damage to the device when disconnecting the weighing
t
module and electronics module! The connection of the weighing
module and the electronics module must not be disconnected during
operation.
Level and adjust the device.
t
The device is ready for use.
y
NOTICE Pointed or sharp-edged objects may damage the operating
t
display! Touching the operating display with objects, such as pens, may
damage the touchscreen surface of the operating display. Only touch
the operating display with your fingertips.
To switch the device off: Press and hold the [On | Off] key.
t
8.2

Leveling the Device

Leveling compensates for any inclines at the device's installation site.
8.2.1 Leveling a Device with Motorized Feet
Devices with motorized feet are leveled automatically. If leveling is neces-
sary: The [Leveling] display flashes.
Procedure
Press the [Leveling] button.
t
The [Leveling] display flashes
y
The device levels itself automatically using the motorized leveling feet.
y
MCE
®