Removing the Chassis Cover
1. Make sure the system and all other peripheral devices connected to it has been powered-
off.
2. Disconnect all power cords and cables.
3. The 8 mounting screws on the rear side of the system are used to secure the cover to the
chassis. Remove these screws and then put them in a safe place for later use.
Mounting Screw
4. After removing the mounting screws, lift the cover up.
Lift the Cover Upward
Chapter 2 Installation
Chapter 2
5. The Mini PCIe slot and SIM card slot are readily accessible after removing the chassis
cover.
Mounting Screw
12
Mini PCIe Slot
SIM card slot
www.dfi.com