DFI KS211 User Manual page 15

Panel Power Select
J11
3 3
2 2
1
1
1-2 On: +5V 2-3 On:
+3.3V (default)
J11 is used to select the power that supplies with the LVDS panel.
Important:
Before powering-on the system, make sure J11's setting matches the LVDS panel's
specification. Selecting the incorrect voltage will seriously damage the LVDS panel.
Chapter 3 Hardware Installation
Chapter 3
MMC/SD Mode Select
MMC/SD Mode SW29
Program Mode All off
eMMC Boot 2, 3, 4, 7 On
SD Boot 2 On
SW28 and SW29 are used to set the MMC/SD Card socket via the selections of Program Mode,
eMMC Boot, or SD Boot.
15
SW28 SW29
SW28
5, 6 On
1 On
All off
www.dfi.com