DFI KS211 User Manual page 29

MFG Tool Guide
The features, including windows style GUI, multiple devices support, explicit status monitoring,
versatile functionalities and highly flexible architecture, make it a best choice to meet your
critical timing, cost and customization requirements.
Please follow the steps to program android system images.
Step 1
Unzip the tool package to your local directory, say: D:\mfgtools-rel\, and enter it, you will find
out an .exe file named MfgTool.exe. Without any installation steps, you can run it directly. So,
just run it. You should be able to see the user interface below.
Step 2
The user interface appears to have nothing to do since there is nothing is selected, so let's
configure something necessary.
Click Profile drop menu and you will find out many platforms. Choose the right one based on
your platform.
Appendix A BSP User Guide
Appendix A
Step 3
Now you need to connect your board to one USB port on your PC. Please make sure that you
have set the board to the bootstrap mode before powering on the board.
If your device is the device listed below, then you will find that a device with the HID mode
appears on your PC when you connect your board to one USB port and power on it. Please
jump to Step 4.
i.MX23/28/50
If your device is the device listed below, then you have to install driver for it:
i.MX25/35/51/53
A popup window as shown below will appear when you connect your board to one USB port
and power on it.
Choose the "Install from a list or specific location" option and click the "Next" button.
29
www.dfi .com