How To Install C-Map Charts; How To Register The Etoken - Furuno FMD-3200 Operator's Manual

3.5

How to Install C-MAP Charts

3.5.1

How to register the eToken

The eToken is a hardware mechanism (installed inside the processor unit) used for
password authentication. Registration of the eToken is required only once, before you
install the C-MAP database.
1. Get into the Chart maintenance mode then click the [License] button on the In-
stantAccess bar to show the [Licenses] dialog box.
2. Click the [C-MAP] tab to the show the [Licenses] dialog box for C-MAP.
3. Click the [C-MAP Setup] button.
4. You are asked if you are sure to continue; click the [OK] button to continue and
register the eToken.
"CMAP: No connection to eToken" disappears from the Permanent warning box after
completion of the registration.
3. HOW TO MANAGE CHARTS
3-9