Split Screen - Furuno FMD-3200 Operator's Manual

1.18

Split Screen

You can split the screen in two, horizontally
or vertically, in the Voyage navigation mode.
To activate the split screen or return to the
full screen, click the [DISP] and [TWO DISP]
buttons on the InstantAccess bar to show the
choices for screen division. Click the screen
division desired.
The example below shows the vertical split
screen. The active display can be switched
by clicking an [ACTIVE] button at the top of
the display. The dividing line between the main and sub views cannot be moved.
About the split screen
• The display may not be updated when switching to the Voyage planning mode. If
this occurs, switch to the Voyage navigation mode, restore the split screen display
then return to the Voyage planning mode.
• The own ship mark may not appear at the screen center when releasing the split
screen display. If this occurs, click the indication "TM/CU Reset" at the top right posi-
tion on the screen to show the own ship mark at the screen center.
• The TM reset feature does not work in the split screen display. To return the own ship
mark to the screen center, click the indication [TM/CU Reset] at the top right position
on the screen.
• The TM reset does not work after switching from the split screen display to the full
screen display. To return own ship to the display area, drag the chart to release the
TM reset, then click the indication "TM Reset off" to restore the TM reset.
• The sub view can display can use a location and chart scale different from the
main view. However, not all chart objects are displayed in the sub view
• Any changes made to chart objects (ex. items on the [Chart Display] menu) are
only reflected on the main view.
Click ACTIVE button to
switch active display.
Main View
Dividing line
Sub View
1. INTRODUCTION
Full screen
Vertical split
screen
Horizontal split
screen
1-15