How To View Status Of Chart Cells; How To Open Charts - Furuno FMD-3200 Operator's Manual

3.13.2

How to view status of chart cells

The [Cell Status] dialog box shows the status of the chart cells stored in the system.
To show this dialog box, get into the Chart maintenance mode then click the [Cell Sta-
tus] button on the InstantAccess bar.
• Type: Type of chart cell, ENC, C-MAP or ARCS.
• Chart Name: Chart name
• Data Server: The name of the data server where the chart was downloaded from.
• Edition/Issued Date: Edition no. and issued date of the chart cell.
• Update: Num/Date: No. and date of the update of the chart cell.
• Updated: [yes] is shown if the cell is up-to-date, [no] if the cell is not up-to-date,
[maybe] means the cell has not been updated from more than one month.
3.14

How to Open Charts

In the Chart maintenance mode, click the [Manage Charts] button on the InstantAc-
cess bar to display the dialog box shown below. Put a checkmark next to the chart(s)
to open then click the [Open Chart] button.
Note: After opening several charts, reset the power to maintain performance.
3. HOW TO MANAGE CHARTS
3-21