How To Install Enc Charts That Are Not In Compliance With Imo Standards - Furuno FMD-3200 Operator's Manual

4. When the installation is completed, information about the installation appears in
the [Error/Warning/Guidance] window. Click the [Confirm] button to finish.
5. If applicable, set the next sequential medium and repeat steps 2-4 to install the
next charts.
Note 1: When many charts are installed, the ECDIS checks for error in the installed
chart data at the next power up. This is not an indication of malfunction.
Note 2: Previous versions of charts cannot be displayed if installed after installing the
latest versions.
3.3 How to Install ENC Charts that are not in Compli-
ance with IMO Standards
The ECDIS can, in some cases, install S57 ENC charts that are not in full compliance
with S57 standard coding for transfer medium. Minimum requirements for manual in-
stallation are legally coded:
• XXXXXXXX.000 file, which includes a Base cell.
• XXXXXXXX.NNN file, in which NNN is a number from 001 to 999, and which in-
cludes an update.
To install charts without building a named "medium catalog" do as follows:
1. Set the medium (DVD, USB flash drive, etc.) that contains the charts.
2. Get into the Chart maintenance mode then click the [Manage Charts] button to
show the [Manage Charts] dialog box.
3. HOW TO MANAGE CHARTS
3-5