3. HOW TO MANAGE CHARTS
3.5.2
How to install the C-MAP database
When you install the C-MAP database from a medium, all data is saved to the SSD.
Note 1: Do not cancel the installation of a chart while it is in progress. Cancellation will
automatically reset the power, stopping the installation. If this occurs, try to install the
chart again. If the installation fails, reset the power and try again.
Note 2: Disable the Chart Alert function at the [Check Area] page of the [NAV Tools]
box (see section 8.2) before installing any C-MAP Pro+ charts.
1. Insert the medium that contains the C-MAP database.
2. Get into the Chart maintenance mode then click the [AUTO Load] button on the
InstantAccess bar.
3. Find the medium that contains the C-MAP database then click the [OK] button to
install the database.
The [Install chart data] window appears and shows the percentage of completion,
with digital and analog indications.
To show details during the installation, click the [Show detail] button.
To close the [Message] window, click the [Hide detail] button.
3-10