Table of Contents
Advertisement
NOTE: Based on extensive experience and a medium-hard coffee blend, we
recommend replacing the burrs following the quantities in next table:
E6 OD
E8 OD
E10 CONIC OD
E10 MASTER CONIC OD
12.3. Grinding group maintenance
Not following the recommended burr life guidelines can compromise the safety of
the grinder.
These operations should be done by a qualified service tecnician.
To perform grind chamber maintenance please observe the following steps:
Turn off the grinder by making sure the main power switch (
position. Disconnect the plug from the power source. Loosen the hopper security
screw (
) using a flat head screw driver as seen in Fig.2 and remove the hopper
(
) from the grind regulator (
using a Torx T20 screw driver following Fig.10.
K06307 | v. 22/07/2015 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
Steel
400 Kg
800 Kg
1,200 Kg
1,200 Kg
). Loosen the screws on the grind regulator (
Red Speed Lucidate
5,000 Kg
8,000 Kg
8,000 Kg
) is on the OFF
)
23
Hide quick links:
Advertisement
Table of Contents
