Technical Characteristics - Compak E6 OD Instruction Manual

5. TECHNICAL CHARACTERISTICS

5.1. Usage
The coffee grinders are intended for use on commercial premises and facilities where
ground coffee is required, or in small stores that sell coffee. The grinder must only be
used to grind coffee beans. Any use other than this will be considered improper and
dangerous.
NOTE: The manufacturer will not be held responsible for any damages resulting from
improper use of the equipment, or for not following the safety measures as outlined
below.
5.2. Technical data
Model
E6 OD
E8 OD
E10 CONIC
OD
E10 MASTER
CONIC OD
4
100 V
50 Hz
Electrical
600
power
Spin speed 1,270
Electrical
750
power
Spin speed 1,250
Electrical
890
power
Spin speed 335
Electrical
850
power
Spin speed 326
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/07/2015 | K06307
100 V 110 V 220 V
60 Hz 60 Hz 60 Hz
700 700 610
1,530 1,580 1,290
810 860 735
1,540 1,600 1,600
960 825 825
388 400 375
1,000 935 930
378 325 388
230 V 240 V
50 Hz 50 Hz
630 730 (W)
1,310 1,500 rpm
730 840 (W)
1,325 1,330 rpm
800 850 (W)
325 331 rpm
950 975 (W)
340 345 rpm