Maintenance - Compak i3 Touch User Manual

10.
CLEANING
10.4. CLEANING THE OUTSIDE OF THE
GRINDER
10.4.1 To clean the exterior of the grinder, first
wipe with a dry soft cloth, and then gently wipe
with a damp cloth and neutral soap.
10.5. CLEANING THE TOUCH SCREEN
10.5.1 Proper cleaning should be done with a
soft, damp microfiber towel. Preferably distilled
water or other cleaning product specifically
designed for touch screen cleaning.
Turn off the grinder and gently wipe off the
screen using a circular motion.
14
11.
11.1.
11.1.1 Before performing any type of
maintenance you should:
•
•
In case of breakdown or malfunction, turn off
the appliance, we should never try to repair it, it
is essential to call the nearest technical service.
11.2.
GRIND CHAMBER
11.2.1 To guarantee the efficiency and correct
operation of the grinder, it is essential to follow
manufacturer instructions and ensure that all
maintenance work is carried out by qualified staff.
Dull burrs will result in; a lower quality grind,
greater heat generation in the coffee and
grinder, increased electrical consumption, and
finally it puts additional stress on the grinder
motor.
K09659H01 | PROC-CAL/002/03 USER MANUAL | V. 06/09/2023

MAINTENANCE

GENERAL WARNING
Always turn OFF the main power switch
to the off position ( ).
If the grinder is jammed, unplug it from the
power source and contact an authorized
service technician.
NOTE: Not following these warnings
can compromise the safety of the
grinder as well as the user.
GENERAL MAINTENANCE OF THE
Not following the recommended
burr life guidelines can compromise
the safety of the grinder.
These operations should be done
by a qualified service technician.