Compak E6 OD Instruction Manual page 12

8.2. Grinder up set
Place the hopper (
is in the closed position. Lock the hopper (
to gently tighten the hopper security screw making it match to the hole at the bean
hopper collar (
Remove the hopper lid (
) (Fig. 3).
hopper (
Plug in the grinder, and place the main power switch (
/ I-OFF-II to position AUTOMATIC / I and open the bean trap (
pass into the grind chamber.
8.3. Grind adjustment system
8.3.1. Parallel micrometrical system
Rotate the grind regulator (
Rotating the grind regulator clockwise will result in a courser grind; turning the
regulator counter clockwise will result in a finer grinder* (Fig. 4).
Once you reach the desired grinding point, you can fix the grinding regulation (
using the regulation break (
10
) on the grind regulator (
) (Fig. 2).
), fill the hopper with coffee (
) until reaching the grind level desired.
) (Fig. 5).
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/07/2015 | K06307
) and make sure the bean trap (
) in place using a flat head screw driver
), and replace the lid on the
) AUTOMATIC–OFF–MANUAL
)
) to allow coffee to
)