Compak E6 OD Instruction Manual page 16

Once the grind cycle is initiated, it can be paused by pressing the lower activation
button ( ). The cycle will pause, and will complete the timed grind cycle as long as
the lower activation button is pressed again within 10 seconds. After 10 seconds of
inactivity, the grind cycle will reset to the complete cycle time.
Grind pause can be activated or deactivated by pressing the lower pulse button
( ). First, set up by following these steps: MENU / SET UP SETTINGS / SET UP GRIND
PAUSE.
9.5. INSTANT Mode
In this mode of operation when making the selection of one, two or three doses of
coffee by pressing the appropriate numeric LCD icon ( ) screen starts grinding the
selected dosis without the need to actuate the lower dose button ( ).
The time set for that dose will decrease to zero, at which point the dose ends.
Once the cycle starts grinding using the lower dose button ( ) and is pressed again,
the grinding cycle will stop. If within 10 seconds it is pressed again, it will complete
the remaining time of the original dose time setting. After 10 seconds of inactivity
the grinder will return to standby mode.
To pause by pressing the lower activation button ( ), you can enable or disable,
accessing MENU / SET UP SETTINGS / SET UP GRIND PAUSE.
In this mode, pause grinding may also be performed by pressing the active icon on the
LCD display ( ) this pause cannot be enabled or disabled via the MENU.
14
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/07/2015 | K06307