Table of Contents
Advertisement
10. CONFIGURATION
10.1. Display icon guide
10.2. Grind time configurations
The grind times can be configured for the Automatic, Preselect and Instant modes.
When modifying in one of three modes are updated for all modes simultaneously.
To modify the time of one dose, press the time of the respective dose numerical
icon (
,
or
seconds or less) by pressing the
You can also change the time of a dose accessing MENU / SET UP SETTINGS / SET UP
TIME / TIME DOSE 1, 2, 3*.
Automatically the icon of the desired dose icon and the
color and the four time numbers will then begin to flash.
There are two ways to modify the time:
• Press the icons
the icon
• Also, the time can be changed by using the lower dose button (
(
) found on the LCD screen (
will begin to run and the time, starting at zero, will increase until the chosen
button is released.
*
Available only for the 3 dose software option.
16
) on the touch screen twice (double tap), followed immediately (2
button.
or
on the LCD screen and the time will increase, and press
to decrease the time.
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/07/2015 | K06307
Access to menu.
Value or selection aproval.
Return.
Up shift in menu.
Decrease value.
Down shift in menu.
Increase value.
). If any of these options are pressed, the grinder
icon will change to active
) or the
icon
Hide quick links:
Advertisement
Table of Contents
