Power Tilt Switch (Outboard Motor Pan) - TOHATSU BFT 115A Owner's Manual

(R3 type) (DUAL TYPE)
POWER TRIM/TILT SWITCH
(RIGHT)
(LEFT)
When the boat is mounted with the
two outboard motors, tilt up the right
and left outboard motors one by one
using the switch. Set the tilt lock
lever of one outboard motor at the
LOCK position, then tilt up another
outboard motor.
After tilting down the outboard
motors, adjust the trim angle of the
right and left outboard motors using
the switch.
Power Tilt Switch
(outboard motor pan)
POWER TILT SWITCH
When you are away from the power
trim/tilt switch on the control lever
side, you can operate the power tilt
switch on the outboard motor side.
The switch operation is the same as
that of the power trim/tilt switch on
the remote control lever side.
Do not operate this power tilt
switch on the outboard motor while
sailing.
OPERATION
67