TOHATSU BFT 115A Owner's Manual page 98

<Inspection>
FUEL FILTER
(inside strainer cup)
1. Remove the engine cover (see page
38).
2. Looking through the translucent
strainer cup, check the fuel filter
for water accumulation and
clogging.
<Replacement>
FUEL TUBES
SCREWS
SUSPENTION STRAP
1. Remove the suspension strap from
the strainer bracket, then remove
the strap from the strainer
assembly.
Before removing the filter, pinch the
fuel tubes on each side of filter using
tube clips to prevent fuel leakage.
2. Remove the three screws and
separate the fuel strainer cup from
the strainer body.
MAINTENANCE
3. Thoroughly clean the strainer cup,
and replace with a new fuel filter.
4. Reassemble the strainer body and
the cup using new O-rings.
STRAINER TIGHTENING
TORQUE:
3.4 N·m (0.35 kgf·m, 2.5 lbf·ft)
95