TOHATSU BFT 115A Owner's Manual page 76

COOLING WATER INTAKE PORT
(each side)
3. If the overheat warning system
stays activated, stop the engine.
Tilt up the outboard motor and
check the water intakes for
obstructions. If there are no
obstructions at the water intakes,
return to the closest boat landing
and contact your closest authorized
TOHATSU outboard motor dealer.
When the PGM-FI activated:
1. Consult with an authorized
TOHATSU outboard motor dealer.
When the ACG warning system is
activated.
1. Check the battery (see page 45).
If the battery is OK, consult with an
authorized TOHATSU outboard
motor dealer.
OPERATION
WATER SEPARATOR
When the water separator buzzer
sounds:
1. Check the water separator for water
contamination. If water is
accumulated, clean them (see
page 97).
73