TOHATSU BFT 115A Owner's Manual page 63

Hide thumbs Also See for BFT 115A:
Table of Contents

Advertisement

OPERATION
(R1 type)
FORWARD
NEUTRAL
FORWARD
REVERSE
REMOTE
CONTROL
LEVER
FORWARD
2. Move the remote control lever from
NEUTRAL toward FORWARD
position.
R1 type:
Moving about 30° engages the
gear. Moving the remote control
lever further opens the throttle and
increases the engine speed.
60
(R2 type)
NEUTRAL
REVERSE
FORWARD
REMOTE
CONTROL
LEVER
FORWARD
FORWARD
R2, R3 types:
Moving about 35° engages the gear.
Moving the remote control lever
further opens the throttle and
increases the engine speed.
For the sake of fuel economy, open
the throttle about 80%.
(R3 type)
• When cruising at full throttle, note
NEUTRAL
REVERSE
• If you feel that the engine speed
• See "Propeller Selection" (page 37)
Do not operate without the engine
cover. Exposed moving parts could
cause injury; water may damage
the engine.
For best performance, passengers and
equipment should be distributed
evenly to balance the boat.
that the engine speed must be in the
range BFT115A: between 4,500
-1
min
(rpm) and 6,000 min
BFT150A: between 5,000
-1
min
(rpm) and 6,000 min
jumped up when the hull jumped or
at ventilation, cruise the boat by
returning the throttle to the slow
speed side.
for a relation between the propeller
and the engine speed.
-1
(rpm),
-1
(rpm).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 150a

Table of Contents