Water Separator - TOHATSU BFT 115A Owner's Manual

Hide thumbs Also See for BFT 115A:
Table of Contents

Advertisement

Water Separator

INTAKE MANIFOLD
WATER SEPARATOR
Water separator is located below the
intake manifold. Water accumulation
in the water separator can cause loss
of power or hard starting. Check the
water separator periodically. Clean it
or consult with an authorized
TOHATSU outboard motor dealer for
cleaning.
Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death. Do
not smoke or allow flames or
sparks in your working area.
KEEP OUT OF REACH OF
CHILDREN.
• Always work in a well-ventilated
area.
• Be sure that any fuel drained
from the outboard motor is
stored in a safe container.
• Be careful not to spill fuel when
cleaning the water separator.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled, make
sure the area is dry before
starting the engine.
MAINTENANCE
<Cleaning>
FUEL TUBES
SCREWS
SUSPENSION STRAP
1. Remove the engine cover (see page
38).
2. Remove the suspension strap from
the water separator bracket, then
remove the strap from the separator
assembly.
During removal of the water
separator assembly, take care not
to damage the wire harness with
the water separator bracket.
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 150a

Table of Contents