Incoming Message Sound Quality; Call Screening; Remote Access - Motorola IT.6T User Manual

7.11

Incoming message sound quality

You can adjust the sound quality of incoming messages, there are two different qualities
Normal and High.
1. Press Menu, scroll to
e
2. Scroll to Rec'd Quality
3. Scroll to Normal or
4. Press to return to standby.
NOTE
The sound quality can only be adjusted before recording starts.
If the sound quality is set to
7.12

Call screening

When the answering machine is on and takes a call, you can use the loudspeaker to listen
to the caller leaving a message. You can then identify the caller and decide whether to take
the call in person.
1. When the handset rings, wait for the answering machine to take the call. When the
caller begins leaving a message, the display shows Recording. Press
e
caller.
2. To interrupt and speak to the caller directly, press
3. Press to return to standby.
7.13

Remote access

Remote access allows you to operate your answering machine and listen to your messages
by calling the IT.6T from another phone.
The default setting is Off.
1. Call your IT.6T. When you hear the announcement, press #.
2. Enter your 4 digit remote access PIN (default setting = 0000).
NOTE
You should change this code for additional security, see page 41.
3. Use the following keys to operate your answering machine:
40
Answer Machine and press OK.
and press OK.
High and press OK.
High the message recording time will reduce to 40 minutes.
r
Screen
.
Using the answering machine
to hear the