Door Status Indicators; Buttons And Functions - Automatic Technology GDO-6 v2 Slim-Drive EasyRoller Installation Instructions Manual

DOOR OPENER STATE
OPEN
CLOSE
OPENING
CLOSING
DOOR TRAVEL STOPPED
DOOR OBSTRUCTED WHEN OPENING
DOOR OBSTRUCTED WHEN CLOSING
OPENER OVERLOADED
DOOR IN OPEN POSITION WITH
AUTO CLOSE MODE SELECTED
MAINS POWER INTERRUPTED
PET MODE ENGAGED
O/S/C
Door Code
Light Code
Door Code + Close
Light Code + Close
Force Margin Set + Open
Force Margin Set + Close
Force Margin Set (then) Set
Auto Close Time (then) Open
Auto Close Time (then) Close
Auto Close Time (then) Set
Force Margin Set + Auto Close Time (then) Open
Force Margin Set + Auto Close Time (then) Close
Force Margin Set + Auto Close Time (then) Set
Close for 6 Secs
Open for 6 Secs. + Door in Closed Position
Set (then power on) & hold until all LEDs are off
Door Code (then power on) & hold until Coding LED is off
Set for 2 sec.
PARAMETERS

DOOR STATUS INDICATORS

OPEN LED
FLASHING
FLASHING
FLASHING
ALTERNATING
ONE SECOND
BUTTONS
CLOSE LED
GREEN RED
ON
ON
FLASHING
FLASHING
FLASHING
ALTERNATING
FLASHES FLASHES
FLASHES
RAPID
FLASHES
ON ON
Opens/Stops/Closes the door
Codes a transmitter button for O/S/C function
Codes a transmitter button for light function
Codes a transmitter button for pet (pedestrian) function
Codes a transmitter button for vacation function
Increases the obstruction force margin setting
Decreases the obstruction force margin setting
Reloads the factory set default obstruction force margin setting
Increases the auto close delay time in 1 sec increments
Decreases the auto close delay time in 1 sec increments
Disables Auto-Close (set to 0 secs.)
Each press of the open button increases the light time by 10 secs.
Each press of the open button decreases the light time by 10 secs.
Reloads the factory set default light time
Clears the door limits set positions. Limits then need to be reset
Enters pet (pedestrian) position adjustment mode
Deletes control parameters excluding transmitter storage memory
Deletes all transmitter stored in memory
Re-initialises the Opener to re-calculate force margins
19
DOOR STATUS
BEEPER
LED YELLOW
BEEPS WHILE
DOOR IS MOVING
FUNCTION