Table of Contents
Advertisement
E L A N H O M E S Y S T E M S
When mounting the D16 in an equipment rack, use the included Rack Mount Brackets for secure mounting and proper
ventilation. The D16 requires three rack spaces.
1.
Attach the rack mount bracket onto the D16 chassis from the front as shown in Figure A-1.
Figure B-1
2.
Ensure that the brackets are flush with the front of the unit. Install each of the eight screws (included) through the
side mounting flanges into the holes in the sides of the unit as shown in Figure A-2. Hand tighten screws! Over-
tightening could cause damage to the D16 chassis.
Figure B-2
3.
3. Once the brackets are securely mounted, install the entire assembly into a standard 19" equipment rack from the
front using four rack screws (not included). Three rack spaces will be used.
See Figure A-3.
Figure B-3
© ELAN Home Systems 2010 | All rights reserved.
Appendix B: Rack Mounting
D16
INSTALLATION MANUAL
Page 63
Hide quick links:
Advertisement
Table of Contents
