Power Saving Menu - Elan D16 Installation Manual

E L A N H O M E S Y S T E M S
Figure 2-21

Power Saving Menu

© ELAN Home Systems 2010 | All rights reserved.
Utility Sub-Menu (Continued)
Power Saving Menu
The Power Saving mode uses Music Sense detection to determine if audio signals are
present. If signals are not present, the enabled amplifier channels power OFF. When a
source signal is detected the channels will power ON.
The factory default is ALL ENABLED.
When ALL ENABLED is selected, any channel will shut itself off after 5 minutes with no
audio detected.
ALL ENABLED examples:
If a zone is turned off on an ELAN A/V Controller and the A/V Controller's triggers are not
connected, the D16's channels will turn off after 5 minutes of not detecting audio.
If a zone is muted on the ELAN A/V Controller, the D16's channels will turn off after 5
minutes of not detecting audio.
The D16 audio may drop out in ALL ENABLED mode if the audio being sent to it is at an
extremely low level for five minutes.
(See Trigger information on pages 39-41.)
Once you have selected the Utility sub-menu by cycling through the MAIN Menu options
using the MENU button, use the CHANNEL button to select the POWER SAVING menu.
Use the UP and DOWN arrow buttons to select between All Enabled and All Disabled.
D16 UTILITY
NORM MODE
Power Saving Mode:
All Enabled
D16
MENU
INSTALLATION MANUAL
Page 26