Input View Menu - Elan D16 Installation Manual

E L A N H O M E S Y S T E M S
Figure 2-13

Input View Menu

© ELAN Home Systems 2010 | All rights reserved.
Input View Menu
For information relating to the signal inputs for the D16s channels press the MENU button
to cycle through the setting options until the following screen appears:
D16 INPUT VIEW
Inputs: 1 -> 4
-55
-55
-55
-55
Clip:None
This menu selection displays four bar graphs which correspond to the input signal strength
for each of the 16 channels. Press the UP and DOWN arrow buttons to see information for
the next group of four channels. Press the CHANNEL button to move forward one channel
at a time.
A clipping indicator is located in the bottom left of the screen. The indicator will show if
any of the four currently displayed channels are clipping.
D16
MENU
0db
0db
0db
0db
INSTALLATION MANUAL
Page 21