Appendix B: Rack Mounting - Elan A2 Installation Manual

E L A N H O M E S Y S T E M S

Appendix B: Rack Mounting

Rack-Mount Bracket
When mounting the A2 amplifier in an equipment rack, use the included rack mount brackets for secure mounting
and proper ventilation. The A2 requires one rack space, ensure that one rack space above and below the A6 is left
open for proper ventilation. To install the A2 into a standard 19" equipment rack:
1. Slide the rack mount kit onto the A2 chassis from the front as shown in Figure B-1.
2. Ensure that the unit is flush with the front of the mounting kit. Install each of the eight screws (included) through
the side mounting flanges into the holes in the sides of the unit as shown in Figure B-2. Hand tighten screws!
Over-tightening could cause damage to the A2 Amplifier.
© ELAN Home Systems 2009 • All rights reserved.
Figure B-1
Figure B-2
A2
INSTALLATION MANUAL
Page 23