Fault Menu - Elan D16 Installation Manual

E L A N H O M E S Y S T E M S
Figure 2-4
Fault Display
© ELAN Home Systems 2010 | All rights reserved.
Volume Adjustment Menu (continued)
Use the CHANNEL button to select the desired channel and the up and down arrow buttons
to increment and decrement the gain setting.
A bar graph displays the current channel output (in dBu). The arrowhead indicates a recent
output peak level.
Current trigger status for the selected channel is shown as well as an indication if power
saving mode is engaged (PS). (See Power Saving Menu on page 26.)
The consumer menu does not allow selecting ALL channels at once. This feature is
reserved for installers.

Fault Menu

If a channel is FAULTED the following screen will show in the display.
D16 FAULT
Channel:1
Check Load Impedance
Shutdown:4 QTY
High Temp:0 QTY
Press Up/Dn to Reset
or Contact Dealer
This shows the faulted channel's number as well as how many times the channel has
faulted due to high temperature and low impedance combined. It also shows high
temperature warnings separately. The end user can attempt to clear the fault by pressing
the UP or DOWN arrows.
If the end user is unable to clear the fault they should contact the dealer for assistance. It
is not necessary to stop using the amplifier in the meantime; continuing to use the
amplifier WILL NOT cause additional damage.
The speaker wires should not be connected to different amplifier channels without first
checking for shorts or low impedance on the speakers.
MENU
IN FAULT
D16
INSTALLATION MANUAL
Page 12