Power Menu EDID Lock Select Down Enter EL-4KPM-V66-A1812 PlatinumMatrix Power Menu EDID Lock Select Down Enter EL-4KPM-V66-A1812 PlatinumMatrix TCP/IP HDBT Out HDBT Out HDBT Out HDBT Out HDBT Out HDBT Out HDBT In Ethernet On/Off Global Coax. Out Coax. Out Coax.
Do not substitute or use any other power supply other than the enclosed unit, or a RS-232 and Telnet Commands 15-16 ELAN approved replacement. Do not disassemble either the Transmitter or Certifications Receiver units for any reason. Doing so will void the manufacturer’s warranty.
• 1x HDBaseT input allowing sources to be located remotely using ELAN HDBaseT transmitters • Supports POH (Power Over HDBaseT) to power ELAN transmitters and receivers - no local power supplies required • LAN serving (Ethernet Switch) with compatible ELAN receivers •...
Menu EDID Lock Select Down Enter EL-4KPM-V66-A1812 PlatinumMatrix LCD display – Show the status of input Menu button – Press to enter EDID PTP button-Press to mirror all inputs & output selection and EDID info. setup and outputs (e.g. output 1 to input1, output 2 to input2 and so on).
A ‘Straight-through’ RJ45 patch lead should be used RS-232 2-Way The ELAN matrix can be controlled via supplied 3-pin Phoenix to 9-pin serial cable For full list of protocols please see ‘RS-232 & Telenet Commands’ located at the rear of this manual.
USER MANUAL Matrix HDBaseT Receiver Options There are three HDBaseT receiver options that are compatible with the outputs on the ELAN Premium Series products. EL-4KHDBT-RX-70-E-ARC-IRS Premium HDBaseT receiver which features 2-way IR & RS232, HDMI ARC display distances up to 100m*. Only compatible with EL-4KPM-V88-A2416 and EL-4KPM-V66-A1812 ELAN Premium Matrix products.
PREMIUM SERIES USER MANUAL EDID Control EDID (Extended Display Identification Data) is a data Combination of DIP positions EDID T YPE structure that is used between a display and a source. This Copy EDID from output1 1080P 2.0CH data is used by the source to find out what audio and video 1080P 5.1CH resolutions are supported by the display then from this 1080P 7.1CH...
Terminating HDBaseT CAT cable It is important that the interconnecting CAT cable between the ELAN HDBaseT products is terminated using the correct RJ45 pin configuration. The link CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable and it is advised that this is wired to the T568B wiring standard as this format is less prone to EMI (Electro-Magnetic Interference).
Page 9
Infrared (IR) Distribution The ELAN Premium Series of matrix products include multiple options for control and routing of IR. As default setting IR is globally routed meaning that ALL IR inputs are routed to ALL IR outputs on both Matrix and HDBaseT Receivers and Transmitters.
The ELAN Premium Series matrix units are supplied with IR Remote Control for source selection and general setup. As well as controlling matrix solutions using the original ELAN remote the ELAN products can be controlled using the original Infrared NEC codes shown at the rear of this manual.
Page 11
PREMIUM SERIES USER MANUAL contact techsupport@elanhomesystems.com...
100V-250V, 50Hz-60HZ, 13A NOTE: Specifications are subject to change without notice. Weight details are approximate and will alter per model. Package Contents: • 1 x EL-4KPM-V66-A1812 • 1 x Remote control Remote Includes CR2025 battery • 1 x Rack mounting kit •...
Page 13
PREMIUM SERIES USER MANUAL NEC Customer Code = 1898 Advanced Matrix features are IR commands not available via IR commands COMMAND COMMAND 0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0000 0069 0000 002a 0150 00a8 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015 003f 0015 0015 0015 0015 0015 0015 0015 003f 0015 003f 0015 0015 0015 0015 0015...
PREMIUM SERIES USER MANUAL RS-232 and Telnet Commands COMAND ACTION COMAND ACTION Output Port:xx Audio From Input Port:yy Extract AUD OUT xx Print Help Information xx=[00]: All Output Audio, [01...08]: Output Audio EXT yy yy=[01...08]: Input Port Audio Output Port:xx Audio From Output Port:tt ARC AUD OUT xx HELP Print Help Information...
Page 16
PREMIUM SERIES USER MANUAL COMMAND ACTION EDID xx CP yy Set Input:xx EDID Copy From Output:yy Set Input:xx EDID To Default EDID:zz xx=[00]: All INPUT Port, [01...06]: INPUT Port yy=[01...06]: OUTPUT Port zz=00: HDMI 1080p@60Hz, Audio 2CH PCM zz=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY zz=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD zz=03: HDMI 1080i@60Hz, Audio 2CH PCM zz=04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY...
PREMIUM SERIES USER MANUAL Certifications FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 18
PREMIUM SERIES USER MANUAL Notes –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– www.elanhomesystems.com...
Page 19
PREMIUM SERIES USER MANUAL Notes –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– contact techsupport@elanhomesystems.com...