Triggers - Elan D16 Installation Manual

E L A N H O M E S Y S T E M S
Figure 3-6 D16 Zone Trigger Connections
© ELAN Home Systems 2010 | All rights reserved.

Triggers

+12V Trigger Inputs
A 3.5mm mono interconnect cable is used for the +12V Trigger Input connection. Each
channel pair 1/2, 3/4, 5/6, 7/8, 9/10, 11/12, 13/14 and 15/16 have dedicated triggers.
Trigger 1 is assigned to channel pair 1/2, trigger 2 is assigned to channel pair 3/4 and so
forth.
When the trigger is active the channel pairs turn on.
When the trigger is not active the channel pairs turn off.
If no cables are used, the triggers will be turned on by default.
(See note on triggers on 41)
D16
INSTALLATION MANUAL
Page 39