Appendix A: Ir / Via!Net Command Set - Elan D16 Installation Manual

E L A N H O M E S Y S T E M S
ALL Channel Commands
Stereo In 1_1
Mono In 2_1
Stereo Bus A In
Mono Bus A In
Stereo Bus B In
Mono Bus B In
Volume Down
Volume Up
Unmute
Mute
Mute Toggle
Power Off
Power On
Power Toggle
Link
Unlink
© ELAN Home Systems 2010 | All rights reserved.

Appendix A: IR / VIA!NET Command Set

The D16 IR code set includes 16 ALL Channel commands as well as six Scene commands.
Additionally, each of the 256 possible individual channels has its own group of 16
commands.
Switches each output to its direct input.
Switches each output to its "summed-mono" input. Outputs 1 & 2 are the "summed"
signal of inputs 1 & 2, outputs 3 & 4 are the "summed" signal of inputs 3 & 4, etc.
Switches all ODD outputs to the BUS A "left" input and all EVEN outputs to the BUS A
"right" input.
Switches each output to the "summed" left and right inputs of Bus A.
Switches all ODD outputs to the BUS B "left" input and all EVEN outputs to the BUS B
"right" input.
Switches each output to the "summed" left and right inputs of Bus B.
Decrements the volume of all outputs.
Increments the volume of all outputs.
Unmutes all outputs.
Mutes all outputs.
Toggles all outputs between "mute" and "unmated."
Switches all outputs off.
Switches all outputs on and checks level for min/max turn on values.
Toggles all outputs between "on" and "off."
Links stereo pairs (i.e.: 1 & 2, 3 & 4, 5 & 6, etc.) Allows channel pairs to be controlled
together.
Example: Channels 1 & 2 are being used for a stereo zone; the Link command will force
all IR commands for either channel 1 or channel 2 to affect both channels. This holds
true for all stereo pairs, (3/4, 5/6, 7/8, etc.)
Unlinks stereo pairs (i.e.: 1 & 2, 3 & 4, 5 & 6, etc.) Allows channel pairs to be
controlled individually.
D16
INSTALLATION MANUAL
Page 61