Triggers - Elan D1650 Installation Manual And User's Manual

ELAN HOME SYSTEMS

Triggers

Each channel pair of the D1650 has its own Remote
Turn On/Muting circuit. Individual channel pairs can
be turned on or muted independently of any others.
An "ALL ON" port allows the entire amp to turn on
and mute as one unit. The 12 Volt DC Trigger Out
can be used to turn-on other equipment, additional
amps, or to perform automated functions desired by
the user. The Front Display of the D1650 will show
"MUTED!" when a channel is in Mute.
ALL ON
SOURCE
TRIGGER
OUT
TRIGGER
OUT
Single Source Mutes/UnMutes All Channels Simultaneously
To Mute/Un-Mute the entire amplifier as one entity,
simply connect a system-wide 3-24 Volt AC or DC
Triggering Source to the ALL ON Trigger Input.
Examples of triggering sources include an ELAN
Multi-Zone Controller's SYSTEM TRIGGER OUT or
REMOTE OUT, an A/V receiver's switched outlet
connected to a power supply, or a +12VDC TRIG-
GER OUT from another ELAN D Series amplifier.
Specific Stereo Pair Triggers
ZONE TRIGGER OUTPUTS
1
2
4 5
Multi-Zone System Mutes/UnMutes Each Pair of Channels Independently
To Mute/Un-Mute specific stereo pair inputs, a
zone-specific Triggering Source can be used. As in
the ALL ON example, any 3-24 Volt AC or DC source
may be used to trigger these specific inputs. This
Page 14
+12V TRIGGER INPUTS
ELAN Multi-Zone Controller
ZONE TRIGGER OUTPUTS
3
(Zones 1-3 Shown)
6
D1650/D1651
application gives additional control in advanced
systems. Examples include: Zone Specific Trigger
Outputs from an ELAN Multi-Zone Controller, multi-
ple A/V receivers triggering separate D1650 inputs,
or outboard sensors located in certain areas to trig-
ger specific inputs of the D1650.
+12VDC TRIGGER OUT
D1650
TRIGGER
OUT
+12VDC
TRIG OUT
D1650 Turns On Additional Amp w/ +12VDC Trigger Output
Whenever the D1650 is powered On, the +12VDC
TRIGGER OUT becomes active. As the name
implies, this output sends a +12VDC 100 mA signal
to other devices utilizing a trigger. Examples of
proper usage of the +12VDC TRIGGER OUT include
muting/un-muting another D Series amplifier, Trigger
the switched outlets of a Z Power Controller, or trig-
gering an IR sequence using VIA!
TRIGGER INPUTS ACCEPT
3 TO 24 Volts AC or DC
© ELAN Home Systems, Inc. 2004 • All rights reserved. 7/04
INSTALLATION MANUAL
TRIGGER IN
(ADDITIONAL AMP)
TRIGGER
IN
products.
®