Triggers - Elan D12 Installation Manual

D12
INSTALLATION MANUAL

Triggers

+12V Trigger Inputs
A 3.5mm mono interconnect cable is used for the +12V Trigger Input connection. Each channel pair 1/2, 3/4, 5/6, 78,
9/10, and 11/12 have dedicated triggers. Trigger 1 assigned to channel pair 1/2, trigger 2 assigned to channel pair
3/4 and so forth.
When the trigger is active the channel pairs turn on.
When the trigger is not active the channel pairs turn off.
If no cables are used, the triggers will be turned on by default.
S66A Zone Trigger Outputs to D12 Zone Trigger Inputs
S66A
Page 28
3.5mm mono
interconnect
cable
3.5mm mono
interconnect cable
E L A N H O M E S Y S T E M S
(Zones 1 & 3 Shown)
D12
7/8 9/10 11/12
© ELAN Home Systems 2009 • All rights reserved.