Charging Of Lithium Battery - Skyrc Imax B6 Instruction Manual

Charging of Lithium battery

Charging of lithium battery
NiMH Sensitivity
D.Peak Default
-
-
+
DEC
INC DEC
Batt type
Start
'>3 seconds'
Stop
Enter
NiMH Sensitivity
D.Peak Default
Start
Enter
NiMH Sensitivity
D.Peak Default
Number Battery
Charging
of
voltage
time
cells
Charging
current
Charging lithium battery in the charge mode
This charging mode is for charging Li-Po/Ion/Fe battery without balance lead.
The left side of the first line shows the type of battery you choose.
The value on the left of the second line of the charger is current
u s e r s e t , A f t e r s e t t i n g t h e c u r r e n t a n d v o l t a g e , p r e s s
START/ENTER key for more than 3 seconds to start the
+
process.(charge current: 0.1-5.0A, voltage: 3.7-22.2V).
INC
This displays the number of cells you set up and the processor
detects. "R" shows the number of cells detected by the charger
and "S" is the number of cells set by you at the previous screen. If
both numbers are identical you can start charging by press
START/ENTER button. If not, press BATT TYPE/STOP button to
go back to previous screen to carefully check the number of cells
of the battery pack before going ahead.
This screen shows the real-time status during charge process.
Press BATT TYPE/STOP key once to stop the charge process.
Charged
capacity
16