Charging Of Nicd/Nimh Battery - Skyrc Imax B6 Instruction Manual

Charging of NiCd/NiMH battery

NiCd Sensitivity
D.Peak Default
-
+ -
+
DEC INC
DEC INC
Start
Batt type
'>3 seconds'
Enter
Stop
Battery
Elapsed
Battery voltage
time
Charge Charged
type
current capacity
Charging NiCd/NiMH battery in the charge mode
This program charge the battery using the current you set up. In the "auto" state, you should set
up the upper limit of the charge current to avoid damage by excessive feeding current. Some
batteries of low resistance and capacity can lead to higher current in the "auto" charging mode.
But in the manual mode, it will charge with the current you set. You can make it blink in the current
field and press INC and DEC simultaneously to swap between Auto and Manual Mode.
Allowable fast charge current: 1C-2C
This program is for charging of NiCd/NiMH batteries associated with R/C
models applications. You can press START/ENTER key to make it blink
and then INC or DEC to change the parameter value. Press
START/ENTER key to store the value.
The screen shows the real-time status. Press BATT TYPE/STOP key to
end the program. The sound will emitted to indicates the end of program.
CHARGING OF NICD/NIMH BATTERY
21
NOTE: