STORAGE DATA P ROGRAM
Storage data program
For your convenience, IMAX-B6 has a data storage and load program. It can store five battery
data representing the respective specifications of batteries. You can call back the data when
charging or discharging without setting up the program again. Press START/ENTER key to make
it blink, and use INC or DEC to set up the parameter.
Start
Enter
Type of
Data
Capacity
Voltage
battery
number
Start
Batt type
'>3seconds'
Enter
stop
-
+
DEC
INC
DEC
INC
-
-
+
+
DEC
INC
DEC
INC
DEC
INC
-
-
+
+
DEC
INC
DEC
INC
Start
'>3seconds'
Enter
Setting of the parameter in the screen will not affect the charge and
discharge process. They just present the specification of the battery.
The example is NiMH battery pack, including 12 cells, the capacity is
3000m Ah.
Set up the charge current in the manual mode, or current limit in the auto
mode. Press INC and DEC key simultaneously to make the current field
blink to switch the charge mode.
Set up the discharge current and final voltage.
Set up the charge/ discharge sequence and cycle number.
Saving the data
26