Table of Contents
Advertisement
Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
All specifications and figures are subject to change without notice.
Printed in China
2012
7504-0301-01
INSTRUCTION
INSTRUCTION
Professional Balance Charger / Discharger
Professional Balance Charger / Discharger
Lithium Battery Meter / Motor RPM Tester /
Lithium Battery Meter / Motor RPM Tester /
Servo Tester
Servo Tester
MANUAL
MANUAL
Version 1.0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Skyrc 6x80Plus
Summary of Contents for Skyrc 6x80Plus
-
Page 1: Instruction Manual
INSTRUCTION MANUAL MANUAL Professional Balance Charger / Discharger Professional Balance Charger / Discharger Manufactured by SKYRC TECHNOLOGY CO., LTD. Lithium Battery Meter / Motor RPM Tester / Lithium Battery Meter / Motor RPM Tester / www.skyrc.com Servo Tester Servo Tester All specifications and figures are subject to change without notice. -
Page 2: Table Of Contents
The unit is simple to use, but the operation of a sophisticated automatic LITHIUM BATTERY CONNECTION DIAGRAM ............ charger such as SKYRC 6x80 Plus does require some knowledge on PROGRAM FLOW CHART..................the part of the user. These operating instructions are designed to OPERATION...................... -
Page 3: Introduction
Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on SKYRC 6x80 Plus features the so-called AUTO function that set the operating and safety. Or please do use this product in company with a feeding current during the process of charging or discharging. - Page 4 SPECIAL FEATURES SPECIAL FEATURES Data Store/Load Automatic Charging Current Limit The charger can store up to 10 different charge/discharge profiles for You can set up the upper limit of the charging current when charging your convenience. You can keep the data pertaining to program setting your NiMH or NiCd battery, it is useful for the NiMH battery of low of the battery of continuous charging or discharging.
-
Page 5: Warning And Safety Notes
WARNING AND SAFETY NOTES WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please Batteries installed in a device or which are electrically linked to follow the instructions for maximum safety; otherwise the charger and other components the battery can be damaged or at worst it can cause a fire. - Page 6 WARNING AND SAFETY NOTES WARNING AND SAFETY NOTES Charging Discharging During charge process, a specific quantity of electrical energy is The main purpose of discharging is to clean the residual capacity fed into the battery. The charge quantity is calculated by multiplying of the battery, or to reduce the battery' voltage to a defined level.
-
Page 7: Lithium Battery Connection Diagram
LITHIUM BATTERY CONNECTION DIAGRAM LITHIUM BATTERY CONNECTION DIAGRAM SKYRC 6x80 Plus comes with the built in switching power supply. This diagram shows the correct way to connect your battery to the You can connect the AC power cord directly to the main AC socket. -
Page 8: Program Flow Chart
PROGRAM FLOW CHART PROGRAM FLOW CHART 6X80 Plus 6X80 Plus... -
Page 9: Operation
OPERATION LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM The most important tool to operate the charger is the red rotary dial These programs are only suitable for charging and discharging lithium and black button. batteries with a nominal voltage of 3.7V, 3.6V and 3.3V per cell. These batteries need to adopt different charge technique which is termed as constant voltage(CV) and constant current(CC) method. -
Page 10: Charging Of Lithium Battery
LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM This screen displays the number of cells you S is the number of cells set by you at the set up and the processor detects. R shows previous screen. If both numbers are the number of cells detected by the charger identical you can start charging process. -
Page 11: Storage' Control Of Lithium Battery
LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM identical you can start charging process. If previous screen to recheck the number of not, press button to go back to previous cells of the battery pack before going ahead. Press Press Dial screen to recheck the number of cells of the Dial battery pack before going ahead. -
Page 12: Nimh/Nicd Battery Program
NIMH/NICD BATTERY PROGRAM NIMH/NICD BATTERY PROGRAM These programs are for charging or discharging NiMH (Nickel-Metal- The screen displays the current state of N i M H 2 . 0 A 9 . 5 2 V Hydride) or NiCd (Nickel-Cadmium) battery. charging. -
Page 13: Charge/Discharge & Discharge/Charge Cycle Of Nimh/Nicd Battery
NIMH/NICD BATTERY PROGRAM PB( LEAD-SULPHURIC ACID) BATTERY PROGRAM This is programmed for charging Pb (lead-sulphuric acid) battery with The screen indicates the discharging state. nominal voltage from 2 to 20V. Pb batteries are totally different from NiMH 0.1A 7.42V You can rotate the Start/Enter dial to alter 022:45 00890 NiMH or NiCd batteries. -
Page 14: Using The Charge Control Software "Charge Master
“mini-B” plug which can connect to charger directly. Set the discharge current, which can be adjusted DSCH CURRENT The “Charge Master” can be download from www.skyrc.com. For more 2.2A (0.1A-5.0A). details, please refer HELP file which can be find in “Charge Master”... -
Page 15: Lithium Battery Meter
BATTERY MEMORY SET LITHIUM BATTERY METER The user can check battery's total voltage, the highest voltage, the Set the terminal voltage, which can be TVC=YOUR RISK lowest voltage and each cell's voltage. adjusted(4.18-4.30V). 4.20V Please connect the battery to the charger main battery lead to battery SELECT socket and balance wires to balance socket. -
Page 16: Motor Rpm Tester
MOTOR RPM TESTER SERVO TESTER The charger can test motor RPM. Please do as follows, The charger can check whether the servo works. Please do as follows, Connect the motor and ESC. Connect the battery to the power. Switch off the ESC and connect it to the battery. Connect the servo to the servo port in left side of the charger. -
Page 17: System Set Up
SYSTEM SET UP SYSTEM SET UP It will be operated with the default value of the essential user settings by 11.9, set this number as the value for when it is connected to a DC 11~18V battery for the first time. The safety timer setting. -
Page 18: Various Information During The Process
VARIOUS INFORMATION DURING THE PROCESS WARNING AND ERROR MESSAGE It incorporates a variety of functions for the systems to verify processes Press and hold the Start/Enter dial for 3 seconds LOAD FACTORY SET and the state of the electronics. In case of an error the screen will ENTER to load the factory set. -
Page 19: Specification
(stated values refer to one charger except built-in power supply, dimension & weight) JST/BEC charging cable Dean charging cable Futaba RX charging cable 5201-0043-01 5201-0012-01 5201-0044-01 THE SET CONTAINS 1. SKYRC 6x80 Plus Charger 2. XH Adaptor TRAXXAS charging cable Glow charging cable Crocodile clip charging cable 3. Power Cord 5201-0033-01 5201-0045-01 5201-0031-01 4. -
Page 20: Liability Exclusion
This charger is designed and approved exclusively for use with the We guarantee this product to be free of manufacturing and assembly types of battery stated in these Instruction Manual. SKYRC accepts no defects for a period of one year from the time of purchase. The...
Need help?
Do you have a question about the 6x80Plus and is the answer not in the manual?
Questions and answers