Snmp Configuration; Add Trap Destination; Current Trap Destinations; Figure 3-8: Vistalink - evertz 7800 Manual

7800 MultiFrame Manual
7880DEC-MP2HD-2 Dual HD MPEG-2 Decoder
3.7.

SNMP CONFIGURATION

Figure 3-8: VistaLINK

PRO – SNMP Configuration
®

3.7.1. Add Trap Destination

The SNMP destination can be added from VLPro interface in this field. Enter the IP address of the
computer with VLPro Server and click the Apply button. The IP address will be transferred to the
Current Trap Destinations section.

3.7.2. Current Trap Destinations

The Current Trap Destinations field displays SNMP destination addresses configured on card.
Identical SNMP notification will be sent to each location. Each destination can be removed by
selecting the remove button beside the trap you wish to remove and then clicking the Apply button.
7880DEC-MP2HD-2 - 19
Revision 1.0