Table of Contents
Advertisement
Attachment Pedal (Hydraulic Crusher) (Optional)
The crusher can be operated using attachment pedal (1)
located on the right front of the seat, as illustrated.
d
CAUTION: Be sure to lock attachment pedal (1) with
pedal lock (2) when the attachment pedal is not in
use. Do not allow your foot to rest on the pedal when
the attachment pedal (1) is not in use. When changing
pedal lock (2) position, pull the pilot control shut-off
lever up to the LOCK position.
1. Select the proper hydraulic crusher icon on work mode
selection screen (3). Refer to the descriptions about
the work mode on page 5-14 for work mode setting
procedures.
2. Move pedal lock (2) forward to the UNLOCK position.
3. Push down on attachment pedal (1) either forward or
backward to open or close the crusher.
4. Remove foot from attachment pedal (1) to stop the
crusher.
5. Always keep attachment pedal (1) locked with pedal lock
(2) when attachment pedal (1) is not in use.
OPERATING THE MACHINE
Fully Tighten
the Stopper
Bolt
5-3
1
Locked Attachment pedal (Crusher)
1
Unlocked Attachment pedal (Crusher)
1
MDAA-05-001
3
MDAA-01-101EN
2
M1J1-13-012
2
M1J1-13-006
Advertisement
Table of Contents
