Manual Filter Driver Installation / Uninstallation - Smartek Vision Giganetix GC Series User Manual

3.4 Manual Filter Driver Installation / Uninstallation

If the SMARTEK Vision GigEVision Filter Driver needs to be installed manually, it can be installed independently
of the GigEVisionSDK by executing a batch script (*.bat), located in the SDK's installation directory after
successfully installing the GigEVisionSDK.
This is for example the case if the first instance of the GigEVisionClient starts without the filter driver, showing
the message in Figure 62. Additionally a warning message in the top bar of GigEVisionClient is displayed -
"Warning: Smartek Filter Driver not loaded".
The batch scripts can be found in a subfolder of the installation directory. By default the GigEVisionSDK is
installed into the following folder:
C:\Program Files\SMARTEKvision\GigEVisionSDK\..
The driver specific files are located in the following subfolder:
..\drivers\FilterDriver\..
The driver is being installed by executing GigEVDrvInstall.bat, uninstalled by executing GigEVDrvUninstall.bat
Figure 62: Warning: Smartek Filter Driver not loaded
3 Smartek GigEVisionSDK Library
80
SMARTEK Vision Giganetix User Manual Version 2.1.4