Table of Contents
Advertisement
Wireless ADSL VPN Router User Guide
Incoming Rules (Inbound Services)
This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked.
Data - Incoming Rules Screen
Inbound Services
Select the desired Service. This determines which packets are
Service
covered by this rule. If necessary, you can define a new Service
on the "Services" screen, by defining the protocols and port
numbers used by the Service.
Select the desired action for packets covered by this rule:
Action
•
•
•
•
Note:
•
•
•
Select the PC or Server on your LAN which will receive the
Send to
inbound traffic covered by this rule.
LAN Server
These settings determine which packets are covered by the rule,
WAN Users
based on their source (WAN) IP address. Select the desired
option:
•
•
Figure 50: Inbound Services Screen
ALLOW always
ALLOW by schedule, otherwise Block
BLOCK always
BLOCK by schedule, otherwise Allow
Any inbound traffic which is not allowed by rules you create
will be blocked by the Default rule.
BLOCK rules are only useful if the traffic is already covered by
an ALLOW rule. (That is, you wish to block a sub-set of traffic
which is currently allowed by another rule.)
To define the Schedule used in these selections, use the
"Schedule" screen.
Any - All IP addresses are covered by this rule.
Address range - If this option is selected, you must enter the
64
Advertisement
Table of Contents
