Table of Contents
Advertisement
Wireless ADSL VPN Router User Guide
•
•
Note:
•
•
•
Select the desired option to determine which PCs are covered by
LAN Users
this rule:
•
•
PC - If using Single PC above, select the PC or Server on your
LAN which will be covered by this rule.
These settings determine which packets are covered by the rule,
WAN Users
based on their source (WAN) IP address. Select the desired
option:
•
•
•
This determines whether packets covered by this rule are logged.
Log
Select the desired action.
•
•
•
•
ALLOW always
ALLOW by schedule, otherwise Block
Any outbound traffic which is not blocked by rules you create
will be allowed by the Default rule.
ALLOW rules are only useful if the traffic is already covered
by a BLOCK rule. (That is, you wish to allow a subset of traffic
which is currently blocked by another rule.)
To define the Schedule used in these selections, use the
"Schedule" screen.
Any - All PCs are covered by this rule.
Single PC - Only the selected PC is covered by this rule.
If selected, you must select the PC.
Any - All IP addresses are covered by this rule.
Address range - If this option is selected, you must enter the
"Start" and "Finish" fields.
Single address - Enter the required address in the
"Single/Start" fields.
Always - always log traffic considered by this rule, whether it
matches or not. (This is useful when debugging your rules.)
Never - never log traffic considered by this rule, whether it
matches or not.
Match - Log traffic only it matches this rule. (The action is
determined by this rule.)
Not Match - Log traffic which is considered by this rule, but
does not match (The action is NOT determined by this rule.)
66
Advertisement
Table of Contents
