Table of Contents
Advertisement
Wireless ADSL VPN Router User Guide
VPN Policies Screen
This screen is displayed when you select VPN on the Advanced menu. It allows you
to create, modify and manage your VPN Policies.
If you have not created any policies, the Policy Table will be empty.
Data - VPN Policies Screen
Policy Table
Buttons
Save
Edit
Delete
Add Auto Policy
Figure 58: VPN Policies Screen
The Policy Table contains the following data
•
Enable - Use this checkbox to Enable or Disable a Policy
as required. Click "Save" after making any changes.
•
Name - Each policy is given a unique name to identify it.
This name is not known to the remote VPN endpoint; it is
used only to assist managing your policies.
•
Endpoint - The address of the remote VPN endpoint.
•
Type - The Type is "Auto" or "Manual" as explained
above.
•
Local LAN - IP address or subnet on your local LAN.
Traffic must be from (or to) these addresses to be
covered by this policy.
•
Remote LAN - IP address or subnet on the remote LAN.
Traffic must be to (or from) these addresses to be
covered by this policy.
•
ESP - ESP (Encapsulating Security Payload) encryption
protocol used for the VPN data.
Save any changes to the "Enable" setting for each policy.
Edit (modify) the selected policy. (Select a policy by clicking
on the radio button.)
Delete the selected policy. (Select a policy by clicking on the
radio button.)
Change to the input screen for an "Auto" policy. See the
following section for details.
When the new policy is saved, it will appear in the bottom
row of the Policy Table.
76
Advertisement
Table of Contents
