Table of Contents
Advertisement
Advanced Features
VPN- Manual Policy Screen
This screen is displayed when you click the Add Manual Policy button on the VPN
Policies screen, or when you edit an existing Manual Policy. It allows you to define or
edit a "Manual" VPN policy.
An "Manual" VPN policy requires that you enter all data on both VPN endpoints. There
is no negotiation between the 2 VPN endpoints.
Data - VPN-Manual Policy Screen
General
Enter a unique name to identify this policy. This name is not
Policy Name
supplied to the remote VPN endpoint. It is used only to help
you manage the policies.
Select the desired option (IP address or Domain Name) and
Remote VPN
Endpoint
enter the address of the remote VPN endpoint you wish to
connect to.
Note: The remote VPN endpoint must have this VPN
Gateway's address entered as its "Remote VPN Endpoint".
NETBIOS Enable
Check this if you wish NETBIOS traffic to be forwarded over
the VPN tunnel. The NETBIOS protocol is used by Microsoft
Networking.
Figure 60: VPN-Manual Policy Screen
81
Advertisement
Table of Contents
