Dial Peer - New Rock Technologies NRP1000 User Manual

NRP1000 Series IP Phone

5.5.4 Dial Peer

This function offers you a flexible dial mode, allowing you to make phone calls through Internet or
based on a dial peer table. For example, if you know the mapping relationship between the number (156)
and IP address (192.168.1.119) of a peer, and want to call him in P2P mode, you can dial 156 to make
conversation with him.
Another example is that if you want to dial a long distance call to Beijing, you need to dial the area
code 010 before the local phone number, such as 01062213123. To make the dialup process easier, you
can use the dial peer table to set a dialing rule: using 1 to replace the area code 010, which simplifies
01062213123 to 162213123.
To save the memory space and avoid abundant input, the following functions are added:

The sign "x" is added to represent a digit number. If user makes the above configuration, after user
dials 11 digit numbers starting with 13, number 0 will be automatically added to the dialed
numbers.

Square brackets
separated by commas, or a list of digits.
If a user dials 11 digit numbers started from 135 to 139, the phone will automatically add 0 before the
dialed numbers.
Use this phone you can dial out via different lines without switch in web interface.
New Rock Technologies, Inc.
[]" are added to specify the value range. It may be a range, a list of ranges
"
User Manual
5-25