Contact - New Rock Technologies NRP1000 User Manual

Nrp1000 series
Table of Contents

Advertisement

User Manual
Name
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas, or a list of
digits.
* Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
Tn Indicates an additional time out period before digits are sent of n seconds in length. n is mandatory and
can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial plan. If Tn is not specified it is
assumed to be T0 by default on all dial plans.
Cause extensions 1000-8999 to be dialed immediately.
Cause 8 digit numbers started with 9 to be dialed immediately.
Cause 911 to be dialed immediately after it is entered.
Cause 99 to be dialed after 4 seconds.
Cause any number started with 9911 to be dialed 4 seconds after dialing ceases.
Notice: End with "#", Fixed Length, Time out and Digital Map Table can be used simultaneously, System
will stop dialing and send number according to your set rules.

5.6.4 Contact

This function is equivalent to the phone book, recording the contact name, phone number, and ring
tone.
5-36
Description
NRP1000 Series IP Phone
www.newrocktech.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nrp1000/p

Table of Contents