Phone; Audio - New Rock Technologies NRP1000 User Manual

NRP1000 Series IP Phone
Set by web

5.6 Phone

5.6.1 Audio

In this page, you can configure voice-relevant parameters.
Figure 5-19 Audio setting interface
Table 5-18 Audio setting parameters
Name
First Codec
Second Codec
Third Codec
Fourth Codec
Fifth Codec
Sixth codec
Onhook Time
New Rock Technologies, Inc.
Description
If your dialed phone number starts with
your set phone number. The phone will
send out your dialed phone number
adding suffix number.
Description
Specifies the first preferential DSP codec. The value can be G.711A/u, G.722, G.723.1,
726-32 G.729AB, or None.
Specifies the second preferential DSP codec. The value can be G.711A/u, G.722,
G.723.1,726-32 G.729AB, or None.
Specifies the third preferential DSP codec. The value can be G.711A/u, G.722,
G.723.1, 726-32 G.729AB, or None.
Specifies the forth preferential DSP codec. The value can be G.711A/u, G.722,
G.723.1, 726-32 G.729AB, or None.
Specifies the fifth preferential DSP codec. The value can be G.711A/u, G.722,
G.723.1, 726-32 G.729AB, or None.
Specifies the sixth preferential DSP codec. The value can be G.711A/u, G.722,
G.723.1, 726-32 G.729AB, or None.
Specifies the minimum response time of Hand down. The default value is 200, in ms.
User Manual
Example
When you dial "147",
the number that the
SIP1 server receives
is "1470011".
5-29