New Rock Technologies NRP1000 User Manual page 57

NRP1000 Series IP Phone
Name
Auto Redial
Times
Hide DTMF
Ring From
Headset
Enable Intercom
Enable Intercom
Mute
Enable Intercom
Tone
Enable Intercom
Barge
P2P IP Prefix
DND Return
Code
Turn Off Power
Light
Busy Return
Code
Emergency
Number
Reject Return
Code
Enable Password
Dial
Active URI Limit
IP
Push XML Server
Password Length
Enable
Waiting Tone
Action URL
Settings
Action URL
Settings
Block
Settings
New Rock Technologies, Inc.
Description
Sets the auto redial times of the phone.
Specifies the hide DTMF mode.
Enables Ring From Handset by selecting it, the phone plays ring tone from handset.
Enables Intercom Mode by selecting it.
Enables mute mode during the intercom call.
If the incoming call is an intercom call, the phone plays the intercom tone.
Enables Intercom Barge by selecting it, the phone automatically answers the intercom
call during a call. If the current call is an intercom call, the phone will reject the second
intercom call.
Sets Prefix in peer to peer IP call. For example: what you want to dial is
192.168.1.119, If you define P2P IP Prefix as 192.168.1., you dial only #119 to reach
192.168.1.119. Default is ".". If there is no "." Set, it means to disable dialing IP.
Specifies DND Return code.
Enables Turn Off Power Light by selecting it.
Specifies Busy Return Code.
Call Specifies the Emergency Call Number. Despite the keyboard is locked, you can still
make an emergency call.
Specifies Reject Return Code.
Enables Password Dial by selecting it, when the number entered starts with the
password prefix, the following N numbers
After the password prefix is hidden as *, N stands for the value which you enter in the
Password Length field. For example: after you set the password prefix as 3 and the
Password Length as 2, when you enter the number 34567, it will display 3**67 on the
phone.
Specifies the server IP address that remotely controls thexcorresponding operations of
the phone.
Specifies the Push XML Server, when the phone receives a request, it
will determine whether to display the corresponding content on the phone that are sent
by the specified server or not.
Specifies the Password length.
Call Enables this function you will not hear the tone "beep" when there are multiple
incoming calls
Specifies the Action URL that reports the operation of the phone to the server, for
example, url: http://InternalServer /FileName.xml? (Internal Server is the server IP
address. Filename is the name of xml that contains the action message).
Out
User Manual
5-33