Table 5-10 Service Port Parameters Setting - New Rock Technologies NRP1000 User Manual

User Manual

Table 5-10 Service port parameters setting

Name
Service Port Settings
Web Server Type
HTTP Port
HTTPS Port
Telnet Port
RTP Port Range
Start
RTP Port
Quantity
You are recommended to change the Telnet/HTTP port number to a value greater than 1024.

Because ports with their number smaller than 1024 are reserved for the system.
If you set the HTTP port number to 0, HTTP services are disabled.

5-12
Description
Sets a web service protocol. The value can be HTTP or HTTPS.
Sets a Web browser port. The default port number is 80. To increase the system safety,
you are recommended to change the port to a non-80 standard port, and save the
configuration.
Before using HTTPS, you need to download and then install the HTTPS authentication
certification on the phone. After that, choose HTTPS and configure the Web browser
port. The default port number is 443. To increase the system safety, you are
recommended to change the port to a non-443 standard port, and reboot the phone after
saving the configuration..
Sets a Telnet port. The default port number is 23.
Set the RTP Start port. The port number is allocated automatically.
Sets the maximum number of RTP ports that can be allocated to the phone The default
number is 200.
NRP1000 Series IP Phone
www.newrocktech.com