Service Port - New Rock Technologies NRP1000 User Manual

NRP1000 Series IP Phone
Name
Enable LLDP
Package
Interval(1-3600)
Enable Learning
Function
Quality of Service(QOS) Settings
Enable DSCP
SIP DSCP
Audio RTP DSCP
WAN Port VLAN Settings
Enable WAN Port
VLAN
WAN Port VLAN
ID
SIP 802.1p
Priority
Audio 802.1p
Priority
LAN Port VLAN Settings
LAN Port VLAN
Mode
LAN Port VLAN
ID

5.4.4 Service Port

You can set the Telnet/HTTP/RTP port in this page.
Figure 5-12 Service port setting interface
New Rock Technologies, Inc.
Description
Enables the LLDP function.
Specifies the interval at which LLDP packets are sent, in seconds. The default value is
60.
Enables the LLDP Learn function. If enabled, the phone can automatically learn values
of the QoS, VLAN ID, and 802.1p from the switch. If the data is different from that of
the LLDP server, phone synchronizes its values with that of the switch.
Enables DSCP.
Sets a value for SIP DSCP.
Sets a value for Audio RTP DSCP.
Enables VLAN of the WAN port.
Sets a VLAN ID. The value ranges from 0- to 4095.
Sets a value for SIP 802.1P priority. The value ranges from 0 to 7.
Sets a value for the audio 802.1P priority. The value ranges from 0 to 7.
Enables/Disables the Port VLAN function.
If enabled, you need to input a VLAN ID different from that of the WAN port.
Sets a VLAN ID. The value ranges from 0 to 4095.
User Manual
5-11